Steel and concrete temporary road barrier solutions and vehicle attenuator systems for use on the UK’s road network.
Zoneguard is the lowest deflecting portable steel highway barrier in the world. Energy absorbing permanent and temporary steel barrier, Zoneguard barrier stabilizes as vehicles drive onto the Zoneguard foot limiting barrier deflection.
Successfully tested to BS EN 1317-2 H1 W3, N2 W2, N2 W5, N2 W6 standards, accepted by National Highways, tested to USA standard MASH and other international standards.
Easily transported, Zoneguard weighs 93.5 kg per metre enabling up to 204 m to be efficiently transported on one vehicle for both scheduled and emergency works.
Rapidly installed, Zoneguard can be easily positioned and connects using Zoneguard Speed Joints. Using the Asset Drilling Rig (ADR) gives Zero Hand Arm Vibration and allows up to 2,800 m to be drilled and fixed to a N2 W2 specification in an 8-hour shift.
Integral drainage channels are incorporated into the foot section for ease of handling and manoeuvrability with a fork lift.
You can download any product sheets available, detailing the specifications and applications of each specific solutions. We understand that every project is unique, and choosing the right product is crucial for its success. Therefore, we encourage you to reach out to us with any queries or concerns you might have.
Our team of experts is on hand to assist you in determining the most suitable options for your specific project requirements. Please don’t hesitate to contact us for personalised guidance and support.
(All dimensions in mm)
Side-View
The Zoneguard foot is 200 mm wide on each side ensuring low centre of gravity compared to other steel portable barriers that do not have a foot section.
End-View
Zoneguard portable barrier system is comprised of pressed and galvanized steel panels assembled in 12 m or 4 m sections each being 800 mm high, 700 mm wide and 160 mm wide at the top.
System 4 is fitted with protective steel mesh fencing and has been tested to for use on UK highways, for…
Zoneguard System 5 In-line gate.
Solar Illuminator
Improve safety with the ultimate, temporary barrier illuminating solution. Specifically designed for use with Zoneguard, Varioguard, Multibloc and Rebloc products, to enhance visibility of our range of TVRS during low light conditions. Download brochure here
Zoneguard Swivel Corner Unit
Specially designed to enable to be placed at different angles within a specific works scheme area, such as slip-roads and junctions, making the product more versatile and offering additional protection to both road workers and the passing public.
Concrete Mass Anchor
Ideal for use on structures where pinning cannot be facilitated. Utilise on bridges, fly-overs and road surfaces where potential underground services or utilities do not allow for drilling or fixing.
Transitions
Transitions enable an end-to-end solution for your scheme, even if different containment levels are required.
Top Reflectors
High visibility reflectors can be fixed to define areas within a worksite. The safety of the site is enhanced with this simple accessory.
Rubber Feet
Sets of rubber feet have been specifically designed to fit underneath to help protect a newly laid road surface from damage.
Accessory Holders
These black rubber attachments can be fixed to the top edge of to hold various accessories including signs or flashing beacons.
Delineation Markers
Delineation Markers help workers maintain a safe distance from the barrier whilst working within a scheme.
Chainage and Delineation Markers
Added to Delineation Markers, motorists can identify their precise location using Chainage Marker repeaters on the barrier.
GS6 Post Holders
GS6 Posts indicate to the workforce where an overhead height restriction is, such as a low bridge. The post fits safely into the barrier.