Bristorm Stopper Bollards

The Bristorm Stopper 10 Bollard is a fixed bollard impact tested to BSI PAS 170. The range of stopper bollards are ideal for anti-ram raid applications.

Bridging the gap between our anti-ram bollards and our high-security impact-tested bollards, the Bristorm Stopper 10, has been impact-tested with a 2,500kg impact trolley at 16kph (10mph).

• Impact tested to the new BSI PAS 170 specification the Stopper 10 Bollard is the ideal choice for protecting areas at risk of low-velocity attacks or accidental impacts. The bollards themselves are comprised of a standard 140 CHS HR section cast in concrete.
• The Stopper 10 Bollard can be installed as a standalone product or built into a pedestrian guardrail to be combined as a security and safety feature, keeping pedestrians safe and excluding vehicles from an area.
• The ‘Class 4D Guardrails’ are bolted to the bollards with shear nuts.
• The Bollards have additional lugs (50×10-55lg) of mild steel when a guardrail is required. The height of the guardrails shall be 1,005 mm from the finished ground level.
• In order to comply with the product’s certification, the bollards need to be installed with a clear gap of 1,200 mm, measured 600 mm above floor level.
  With a foundation depth of just 725mm, the Stopper 10 Bollard can be easily installed without vast amounts of excavation, saving on time and minimising disruption.
• The Stopper range comes in steel hot-dip galvanised to BS EN ISO 1461, to protect against corrosion. The product can be fitted with an aesthetic sleeve to meet site requirements if required.
• Looking to protect your shop or warehouse with anti-ram raid bollards? Our Stopper bollards are an ideal solution. Read our complete guide to find out why you need anti-ram raid bollards.

The Bristorm Stopper 20 has been impact-tested to BSI PAS 170, capable of stopping a 2,500kg vehicle at 32kph (20mph). This bollard is ideal for anti-ram raid applications such as the protection of shop frontages or EV charging points.

Brought to you by ATG Access, the Stopper 20 Bollard is next step up in the Bristorm Stopper range, capable of halting a 2,500kg vehicle at 32kph(20mph).

• The Stopper range of bollards has been tested to the new BSI PAS 170 specification, which is used to measure the capability of bollards at speed of 10 and 20mph. This makes these bollards ideal for protecting sites at risk of low-velocity attacks or accidental hits such as retail outlets or car parks.
• For more robust protection we recommend taking a look at our line of PAS 68 rated bollards which have been tested at speeds of 30mph, 40mph, and 50mph.
• Each Stopper 20 Bollard is made up of a standard 168 CHS HR section cast in concrete. Similar to the Stopper 10, the Stopper 20 can be installed either as a standalone bollard or built into a guardrail.
• This allows you to keep pedestrians safe and exclude vehicles from an area.
• When installing the bollard, to comply with the certification the bollards need to be installed with a clear gap of 1,200 mm, measured 600 mm above floor level.
• This ensures that the bollards are installed as tested.
• When it comes to security longevity is key, as such all our Stopper bollards are hot-dip galvanised to BS EN ISO 1461 after fabrication, giving added protection against corrosion.
• The product can be fitted with an aesthetic sleeve to meet site requirements if required.